Search This Blog

Showing posts with label stir plate. Show all posts
Showing posts with label stir plate. Show all posts

Saturday, April 20, 2013

Equipment: Homemade Stir Plate

In addition to temperature control (a future blog post), one of the best ways to improve your homebrew is by pitching adequate amounts of healthy yeast. Depending on the OG of the wort you are trying to ferment, one vial or smack pack of yeast may not be enough. I recommend using a yeast calculator, such as one of the calculators in the links list, to estimate how much yeast to pitch. But how do you pitch enough yeast without wasting money on multiple vials or smack packs? Use a stir plate. A stir plate allows one to grow up a large amount of yeast quickly via continuous aeration of the yeast starter wort. Stir plates can be purchased from many vendors, but they are easy enough to make yourself with a few key items and some knowledge. Here's how I made mine.

The stir plate is, essentially a spinning magnet that turns a magnetic stir bar inside your flask or beaker containing the yeast starter, so you need something that spins: a computer fan. You also need some neodymium magnets. These are easily purchased, but can also be found inside computer hard drives. These magnets are then hot glued to the center of the fan. You'll have to experiment with this to get the best placement. I used a piece of plexi-glass as a mounting surface, but there are many possible applications (a lot of people use cigar boxes or plastic project boxes). Needed as well are a 12V AC power converter and a potentiometer/rheostat (available at Radio Shack). I also added an on/off toggle switch.

I will warn you that some easy electrical wiring is necessary for this project and that if you don't have confidence in what you are doing, don't do this project. You could get hurt, or worse. Disclaimers aside, I wired mine very simply with electrical tape, although soldered connections are recommended. Here is a wiring diagram, but there are several examples available on the internet.


And here are some pictures of my stir plate:


Toggle switch


Potentiometer



Mounting bolts and nuts to plexi-glass platform


Magnets on fan hub



It ain't pretty, but it does the job.



In action with 4k mL flask



Never fear, get out there and make your own stir plate. Be Fermentive!

Wednesday, April 17, 2013

Brewday: Brown Saison

Every once in a while, I get a hankering for something a little bit different than I might normally brew. But, then again, I wouldn't exactly describe my taste in homebrews as "normal." So, my mood of the moment spans two very different styles: low-gravity, sessionable, English-style, milds and bitters; and, Belgian, farmhouse saisons. I will, likely, cover the former in another post, but today I review a brown saison I brewed this past Sunday.

I won't get into the history of the style in great detail, but suffice it to say that, in general, saisons originated in the Wallonian, French-speaking, region of southern Belgium as a fortifying beverage brewed for and consumed by farm workers. It was brewed with a variety of grains and adjuncts, including sugar, and is traditionally a dry, low-alcohol beer with considerable yeast character. Today, although most iterations fall within the 5.5% - 6.5% ABV range, commercial saisons extend from 3.5% all the way up to 9% ABV. The version in the recipe below falls in the 5.0 - 6.0% range. You may be wondering (if you've read ahead) how a 1.070 OG wort will only yield a beer in the 5-6% ABV range. That's a great question. Here's the answer: When I split the batch, rather than pitching only the solid yeast at the bottom of my Mason jars, I pitched everything liquid and all. This diluted my wort some, but I also added an additional quart of juice (which is mostly water) to one half of the batch. These actions reduced the OG's to 1.058 (no juice) and 1.055 (w/ juice) respectively. Oh well, moving on...

Although saisons are not usually my favorite beers, I have had some that were quite enjoyable. I often find them more enjoyable when they are drier and focus more on the peppery yeast character than some of the other fruity esthers or spicy (clove) phenolics. What I did to try to achieve this goal was to grow up yeast from the bottle dregs of two different commercial saisons that I enjoy: Upright Brewing Company's Flora Rustica Saison, and Revolution Brewing Company's Coup d'Etat Saison. This technique can be accomplished fairly easily by making a yeast starter from malt extract. I put mine on a homemade stir plate that continuously aerates the starter for optimum yeast health. Because this beer is currently fermenting and I have not yet tasted it, I do not know exactly what my saison blend will lend to the finished beer. Tasting notes will likely be the subject of a future post. Anyway, here's the recipe and pictures from the brewday.

Brown Saison - all-grain (based on 75% extract efficiency):
Batch size: 5.0 gallons
OG: 1.070
IBUs: 29.4

Grist:
5.25# Pale Malt (Ger.)  40%
4.75# White Wheat Malt  37%
1.00# Old-fashioned Rolled Oats  ~8%
0.75# Cara-pils  ~6%
0.75# Special B Malt ~6%
0.50# Acidulated Malt  ~4%

Hops:
60 min - 1.50 oz. Styrian Goldings (5.40%)
15 min - 0.50 oz. Styrian Goldings (5.40%)
I had originally planned a dry-hopping addition (1 oz. Styrian Goldings 5.4%, 7 days), but have since decided against it so as not to overpower the malt. I was going for a more malty beer with this saison, as demonstrated by my relatively high mash temperature. But, as always, be fermentive!

Yeast:
My Saison blend yeast culture (or any belgian/saison yeast you prefer; here is some info: Wyeast Labs, White Labs, Lallemand Danstar)

Procedure:
Mash at 153F for 45 minutes. Mashout at 168F for 10 minutes. If I had it to do over again, I might have mashed a bit cooler (~150F) to encourage a drier beer. But, as I said, I've not tasted this yet, so it might be fabulous. YMMV (your mileage may vary). I also might not have done a mashout step so as not to limit the fermentability of the wort prematurely.

Pics:

Vorlauf

Vorlauf, cont.

Saison yeast blend


"And we're mashing...and we're mashing." -Jeremy King, BrewingTV

Wort collection

Lovely, clear wort

An absolutely gorgeous day for brewing

Rolling boil

Enjoyed a double IPA

Cooling the wort. I never use a thermometer during this step anymore because 10 minutes is always more than enough time using this IWC. However, my need to do things differently led me to this design. Btw, Don O., of donosborn and BrewingTV fame, is a great repository of homebrewing knowledge. Go there, learn, be fermentive!

...still cooling

My rotund silhouette with a hat on. It was sunny and I'm not getting skin cancer if I can help it.

I split the batch and added this to half

Notice the color difference between no juice (left) and juice (right), and the weird coagulation happening. I'm sure it's fine. I've seen worse and tasted better.

No juice, close-up

With juice, close-up

Test jar sample of w/ juice. Hey, there's me in the reflection!

I hope you've enjoyed these pictures, but I hope even more that you try my recipe and let me know what you think, what changes you made, and how it goes. And, as always, Be Fermentive!